Bracke T35.b

3-Row Disc Trencher

Bracke T35.b is a disc trencher for the larger sites. It can be installed on larger base machines and is suitable for a wide range of site conditions. By using T35.b, you optimize the use of both personnel and machines, resulting in a more profitable business.

• 
• 
• 
• 
• 

Design
The Bracke T35.b is designed to enable it to closely follow uneven terrain. The machine’s hydraulics allow sideways arm movements and the disc to turn about its vertical axis if overloaded. The hydraulics are load-sensing and are connected to the base machine. Central lubrication is standard on the Bracke T35.b.

Machine control
The control system is based on a PLC platform and communicates over a CAN bus. The control system is very user-friendly. The disc trencher is fitted with sensors that send information to the control system about, for example, the base machine’s speed, the angle of the discs, and the position of the arms. The control system has eight programmable operating programs chosen from the controls in the cab. The display is used to make settings in the control system and show information from the scarifier. All units communicate over the CAN bus. The control system keeps track of the scarified area and the distance covered, for both individual sites and in total, as well as the number of hours worked.

Scarification
The operator controls the Bracke T35.b from the cab. Depending on changes in the site conditions, one of the eight preset programs is chosen. The control system gives the operator variation possibilities to set arms and discs on different widths and angles. When necessary, the arms can be lifted separately. It is also possible to vary ground and lifting pressure or operate with a float mode. The Bracke T35.b can be set to work continuously or intermittently.
 

Download

Bracke T35.b