Bracke T35.b

3-Row Disc Trencher

Bracke T35.b is a disc trencher for the professional contractor. It can be installed on larger base machines and is suitable for a wide range of site conditions. By using T35.b, you optimize the use of both personnel and machines, resulting in a more profitable business.T 35.b is designed with articulated joints.

Design
The Bracke T35.b is designed to enable it to closely follow uneven terrain. The machine’s hydraulics allow sideways arm movements and the disc to turn about its vertical axis if overloaded. The hydraulics are load-sensing and are connected to the prime mover. Central lubrication is standard on the Bracke T35.b.



Machine control
The control system, is based on a PLC platform and communicates over a CAN bus. With the new display, the control system is very user friendly. The disc trencher is fitted with sensors that send information to the control system about, for example, the prime mover’s speed, the angle of the discs and the position of the arms. The control system has eight programmable operating programs chosen from the controls in the cab. The display is used to make settings in the control system and read information from the scarifier. All units communicate over the CAN bus. The control system keeps track of the scarified area and the distance covered, for both individual sites and in total, as well as the number of hours worked.



Scarification
The operator controls the Bracke T35.b from the cab. Depending on changes in the site conditions, one of the eight preset programs are chosen.The control system gives the operator variation possibilities to set arms and discs on different widths and angles. When necessary, the arms can be lifted separately. It is also possible to vary ground and lifting pressure or operate with a float position. The Bracke T35.b can be set to work continuously or intermittently.
 

Technical data  
Base machine Forwarder/skidder 18 – 25 metric tons
Weight 6800 kg
Disc diameter 1,000 mm, 1,400 mm incl. teeth
  Replaceable teeth
Hydraulic requirements  
Pressure 170 bar
Flow 160 l/min
Electrical system  
Power 24 V
Control system PCL based
Accessories Seeder: Bracke S35.a
  Extra oil cooler

Info request

Fields marked with * are required